FUJI escalators and travelators
are suited for a variety of needs, while adding value to the image
of your building
  Escalators
  Travelators
  Features
 
  Head Office:
Plot 73(C), Lintang Bayan Lepas 3, Bayan Lepas Industrial Park Phase 4, 11900 Penang. Malaysia.
 
 
Tel: 604-6451 222
Fax: 604-6451 111
  604-6451 145
Email: flem@fuji-lift.com
 
FUJI escalators have been developed with safety and performance in mind. It's aesthetics such as attractive balustrade designs and slimline handrail profile exudes grace and elegance while its sturdy construction provides strength and reliability. The microprocessor-controlled helical-geared drive system incorporates the latest available technology for maximum efficiency and low power consumption. An added flexibility is that FUJI escalators are easy to install and require minimal building space. FUJI escalators have been installed in numerous facilities such as supermarkets and shopping centers world-wide.

To know more about our products, please click here
 
Basic Specifications
Installation : Indoor
Working Hours : 16 hours / day
Rise : 1.0 - 7.5 m
Inclination : 30º / 35º (max. 6m for 3.5”)
Step Width : 600 / 800 / 1000 mm
Horizontal Step : Ttwo / three / four
Speed : 0.5 / 0.65 m/s
Capacity : 4500 / 6750 / 9000 persons / hr
Power Supply : AC 3-phase, 50 or 60 Hz
Lighting Supply : AC single-phase, 50 or 60 Hz
 
 
Available Finishes
Balustrade Design
: Commercial /slimline type with 10mm tempered
safety glass panel
Balustrade Profile : Aluminum / hairline ST/ST
Handrail
: Continuous and vulcanized rubber with steel
cord reinforcement and nylon gliding surface,
black colour.
Decking : Hairline ST/ST
Skirting Panel : Hairline ST/ST sheet with Teflon coating
Step : Die-casting aluminum, natural colour
Step Demarcation : Yellow painting at 3 sides
Landing Plate : Aluminum with black anti-slip grooves; optional as etched ST/ST with black anti-slip pattern
Operational Panel : Emergency stop button, up / down key switches
Step Gap Illumination : Green light by fluorescent lamp
 
 
Basic Specifications
Installation : Indoor / Semi-Outdoor / Outdoor
Working Hours : 24 hours / day
Rise : 1.0 - 1.5 m
Inclination : 30º / 35º (max. 6m for 3.5”)
Step Width : 600 / 800 / 1000 mm
Horizontal Step : Two / three
Speed : 0.5 m/s
Capacity : 4500 / 6750 / 9000 persons / hr
Power Supply : AC 3-phase, 50 or 60 Hz
Lighting Supply : AC single-phase, 50 or 60 Hz
 
 
Available Finishes
Balustrade Design
: Commercial /slimline type with 10mm tempered
safety glass panel
Balustrade Profile : Aluminum / hairline ST/ST
Handrail
: Continuous and vulcanized rubber with steel
cord reinforcement and nylon gliding surface,
black colour.
Decking : Hairline ST/ST
Skirting Panel : Hairline ST/ST sheet with Teflon coating
Step : Die-casting aluminum, natural colour
Step Demarcation : Yellow painting at 3 sides
Landing Plate : Aluminum with black anti-slip grooves; optional as etched ST/ST with black anti-slip pattern
Operational Panel : Emergency stop button, up / down key switches
Step Gap Illumination : Green light by fluorescent lamp

 

 

 

 

 

 

 
 
   © 2005 FUJI Lift & Escalator Sdn. Bhd. All Rights Reserved. Elevators | Escalator | Modernization | Maintenance | About Us | Careers | Contact Us